WK3-180/40气候模拟试验箱

德国WEISS  WK3-180/40气候模拟试验箱
1.2	Technical Data WK3-180/40
1.2.1	Test Chamber

		Test chamber material		stainless steel, 1.4301, surface III D polished 
			Material of test space floor		1.4404, matt surface 
			Test area dimensions		height	approx.	750 mm
width	approx.	580 mm
width between
shelf supports	approx.	540 mm
depth	approx.	450 mm
			Volume of test chamber		approx. 190 l
			Max. loading		130 kg
	Max. loading of test chamber floor	50 kg distributed load
			Max. load per shelf		30 kg distributed load
			Max. load of shelf supports		80 kg

1.2.2	Exterior Housing

		Material		double-coated galvanised steel sheet
			Dimensions of housing		height	approx.	1805 mm
width	approx.	780 mm
depth	approx.	1385 mm
			Overall dimensions 1)		height	approx.	1805 mm
width 	approx.	875 mm
depth	approx.	1545 mm
		Finish		two-coloured, solvent-free, powder coated
corpus	grey-white	(RAL 9002)
front	violet-blue	(RAL 5000)
			Door 		hinged on the left, lockable, optimum contact pressure
			Feet		adjustable, vibration absorbing
			1) The required clearances can be reduced by dismounting components
 
	
	
	
	
1.3	Installation Drawing
	
	 
	
?	Stainless steel port included in basic design
R1:	approx. 125 mm ?
L1:	approx. 50 mm ?
R21	... further installation position right
L21	... further installation position left
D11	installation position in ceiling
1.	Main switch panel
2.	8” colour touch panel
3.	CONTROLPAD
4.	Condensation drain
5.	Power supply cable length approx. 3,5 m
6.	Door without window 
8.	Cooling water supply1
9.	Cooling water drain1
10.	Water supply (demineralised, H2O)
13.	Slotted port1
14.	Compressed air connection 1
#	Width between shelf supports

1 Option
 
	
	
	
	
1.4	Equipment
			Shelf		1 pc., stainless steel
			Stainless steel ports		1 pc. approx. 125 mm ?, right side wall
1 pc. approx. 50 mm ?, left side wall
each port incl. 
1 silicone plug closed
1 slotted plug made of foamed silicone 
			Condensation protection 		condensation cooler for prevention of condensation formation on specimen
		8” TFT colour touch display		fixed to front bracket 
			CONTROLPAD		integrated in door, for display of actual values and modification of operating state
			Control and programming 		digital measuring and control system S!MPAC*
			Interfaces	?	1 Ethernet interface (100/10 Megabit) for integration into network
?	1 USB interface for direct documentation of measured data via USB stick (USB stick not included in scope of supply) or as a printer interface
			Safety temperature limiter	factory-set 
			Specimen protection	high/low temperature fuse according to 
EN 60 519-2, with separate sensor, thermal safety class 2
		High temperature protection of humidification device	high temperature controller
			Specimen switch-off	potential-free contact
			Software temperature limiter	tmin/tmax
			Digital I/O	?	4 digital outputs for control of customer-provided devices by means of potential-free contacts, load max. 24 V-DC, 0,5 A
?	4 digital inputs for feedback of customer provided devices, load max. 24 V-DC, approx. 30 mA