德国WEISS温度冲击试验箱

德国WEISS温度冲击试验箱 TS60技术参数
1.2	Technical data TS 60

	Test chamber	
	Material	stainless steel, Material No. 1.4301
	Basket dimensions	Height	approx.	 370 mm
Width	approx.	 380 mm
Depth	approx. 430 mm
		Contents	approx. 60 l
	Max. weight of specimen	approx. 20 kg
	Exterior housing	
	Dimensions for installation 
and operation	Height 	approx.	 2330 mm
with protective pipe for spindle
Width	approx.	 875 mm
without colour touch panel 
Depth without colour touch panel
 	approx.	 1970 mm
Depth with colour touch panel
	approx.	 2210 mm
	Required clearances for test cabinet	Height	approx.	1895 mm
Width	approx.	 810 mm
Depth  	approx.	1860 mm
(door dismantled)
	Exterior finish	Powder coating, two-coloured
grey white	RAL 9002 
violet blue	RAL 5000
	Door	manual, lockable door, hinge on left
	Door window	approx. 355 x 355 mm
 




1.3	Installation drawing

 

D1	Entry port installed in basic design
D2	Further entry port in the ceiling (option) 
1	Main switch panel
2	Control unit >Colour Touch Panel<
3	Controlpad*
4	Connection for test space drain 
5	Electrical connection, 
 	cable length approx. 3.5m
6	Door with window 
8	Connection for cooling water inlet (option)
9	Connection for cooling water outlet (option)
12	Pressure compensation opening LN2 (option)
14	Connection for compressed air / nitrogen inert (option) 
18	Volume compensation system
$	Safety clearance to VDE 100 Part 729
~	Overall dimension
 



1.4	Equipment

	Basket	Stainless steel, Material No. 1.4301, Max. load 20 kg, state indicator via easily visible pilot lamps, drive via electrical motor and ball screw spindle.
Transfer time, total < 10 sec. 
	Shelf	1 pc. stainless steel, max. load 2.5 kg, 8 mm mesh, with fittings for supporting shelves at a distance of 20 mm in the basket, maximum number of shelves 8 pcs.
	Port	approx. 80 mm ?, stainless steel
	Refrigeration unit	Semi-hermetic refrigeration unit, 
air-cooled version
Chlorine-free refrigerants R404A and R23 without ozone-reducing potential are used. 
	Interfaces	?	1 Ethernet interface (100/10 Megabit) for integration into network 
?	1 USB interface for direct documentation of measuring data via USB stick (USB stick is not included) or as printer interface
	Digital I/O	?	4 digital outputs for control of customer-provided devices by means of potential-free contacts, load max. 24 V-DC, 0,5 A
?	4 digital inputs for feedback of customer provided devices, load max. 24 V-DC, approx. 30 mA

 



1.5	Performance data

	Changeover time between
hot/cold chamber	< 10 sec. 
	Temperature ranges
-  Hot chamber
-  Cold chamber	
from +50 °C to +220 °C
from -80 °C to +70 °C
	Hot or cold chambers can be used as single temperature chambers.
	Temperature constancy, in time	±0.3 K to ±1.0 K
	Temperature homogeneity, spatial depending on adjusted set point value in the temperature range -65 °C to +200 °C	±0.5 K to ±2.0 K
	Heat up speed of hot chamber as per IEC 60068-3-5	17 K/min.
	Cool down speed of cold chamber as per IEC 60068-3-5	3.7 K/min. 
	Heat up speed of cold chamber as per IEC 60068-3-5	3.2 K/min. 
	Alternating temperature tests:
MIL 883 E Method 1010.7, degree of intensity D with 4.5 kg ICs distributed over 2 shelves, measurement in specimen	adaptation time < 15 min. 
	Pre temperature conditioning	Temperature change rates can be increased by selecting higher/lower 
temperatures in the hot/cold chamber
	Calibration values	-40 °C cold chamber and
+125 °C hot chamber